Got it. Thank you!😊

Is that the Mica cap in the hex?

Is there by chance a image of that in one of the videos?

Thank you! I'm slow but sure. Just learning to read a schematic and resistors. Proof that old dogs can still learn.😅

If I read the schematic correctly I answered my own question. Correct?

I was just experimenting with a resistor calculator I discovered. And also verifying resistors from my order from Mouser.

Meg as in?

Stephe thank you very much. Up grades and mods are coming slow but sure. Being methodical is good.😎

Thank you so very much. I found a very handy resistor calculate at Calculator.net. I appreciate your help.

The R8 BOM calls for 4 each 100K 1/2W 5% resistors. Is ok to use 1W?

For the 1/2W, 1W and 3 W resistors I selected from Vishy HVR37, Pro3 and CMF Industrial series. I didn't find them in the Pro2 series. Any comments? THANK YOU! I appreciate your help.🙂

You will find it right here. https://www.mouser.com/ProductDetail/Cornell-Dubilier-CDE/380LX331M550A052?qs=7D1LtPJG0i3i3frrZ2pGDQ%3D%3D