Hi everyone. I bought my 1st tube amplifier ever ( I born in 1963 ) in December 2020, a Reissong A10 directly from China- HiFi ( = A12 but 6N2 driver tubes ). After successfully rebuilding it according to Skunkie´s schematics, I decided to install remote volume control. I bought a remote volume control from Aliexpress, 100k resistance, just like the one in pict below.

It is very crowded and cramped just behind the original volume pot, and the Aliexpress motorized remote pot is rather bulky, so there had to be some engineering work done to install it. I realize this build may not be for everyone, but possibly someone would like to try it out, and then I could give som hints on details of my own installation.

After quite some tinkering, it all worked, and it was really rewarding.

Videos of mechanism in action at google drive:

Internal: https://drive.google.com/file/d/14w27Fm1tgMBgVwl0ce4UEXd8Y2gCotGC/view?usp=sharing

External: https://drive.google.com/file/d/1Q-R1X_1R8L9RYfzRuBatT6jB3OfdxLe3/view?usp=sharing